Get in touch

DTLF 2.250 K

Rotary vane compressors, oil-free

The DTLF 2.250 K is a low pressure, dry-running displacement pump designed to operate on a continuous duty basis. The rotary vane compressor utilises self-lubricating, graphite composite vanes, requires only minimal maintenance, and requires no oil change.


  • Built-in, large inlet filter with clear cover
  • Pressure relief respectively safety valve
  • Vibration isolators
  • Discharge silencers
  • Built-in aftercooler


Volume flow 50 Hz240 m³/h
Pressure relative 50 Hz+1.8 bar
Power 50 Hz15.0 kW
Noise Level 50 Hz84 dB(A)
Volume flow 60 Hz284 m³/h
Pressure relative 60 Hz+1.8 bar
Power 60 Hz18.0 kW
Noise Level 60 Hz85 dB(A)
Weight175 kg without motor


  • 100% dry-running (oil-less) operation
  • Quiet operation
  • Long vane life
  • Continuous duty rated
  • Air-cooled
  • Single shaft direct drive
  • Compact design
  • Variety of motors available


  • Low operation and maintenance costs
  • No cycling times
  • Quiet operation – no silencer enclosures necessary
  • Small footprint for space savings
  • Straightforward construction for fast and easy service on-site to reduce downtime


    Printing and Paper Industry

    Whether you need an individual unit or a system, Becker's vacuum pumps, compressors for blast air, and combined pressure/vacuum pumps are made for the various processes used in the printing and paper industry - from the pre-press stage, to sheet fed and digital presses, to the post-press.

    Environmental Industry

    Vacuum pumps and compressors from Becker are the preferred solution for sparging, wastewater treatment, and aeration.

    General Mechanical Engineering

    Becker provides customised vacuum pump and compressor solutions for numerous mechanical engineering applications across the world, such as conveying, transporting, fixing, lifting, handling, drying, cooling and many more.

  • Construction Industry
    Construction Industry

    Perfect for turning air into power, our vacuum pumps and compressors are built to withstand the high demands of working on construction sites.


    Pneumatic Conveying

    Low pressure and vacuum solutions are perfect for transferring powders, granules, flakes, and other small, dry, low bulk density products.

    Blowing & Injecting

    Compressors are used to build up pressure to supply air for the aeration of waste water, blast air for printing, wine presses, drainage system reliners, and other processes.


This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the usability of this website, serve for direct advertising or simplify interaction with other websites and social networks, will only be used with your consent.

Privacy Policy